CP3B, Heavy Duty Round Pedestal Grounding Clamp
UL Listed
Cast bronze pedestal clamp. Fits up to 1-1/4 inch diameter round computer pedestals. Two bolt pressure cable holders can accommodate wire sizes from #6 to 2/0 AWG. Stainless steel U-bolt, straight bolts, nuts and washers. 4-1/4 x 1-1/2 x 2 in. (10.8 x 3.8 x 5.1 cm). Approximately 17.4 oz. (494 g).| Specifications | |
| material | Bronze |
| weight | 17.4 oz | 494 g |
| dimensions | 4 1/4" X 1 1/2" X 2" |
| pedestal size | Round Pedestal from 1/2" to 1 1/4" in. |
| wire size range | #6 to 2/0 AWG |
Manufacturer Installation Recommendations
- Remove the casting piece from the u-bolt by taking the nuts and washers off the u-bolt.
- Place the u-bolt over the pipe.
- Slip the cast piece onto the u-bolt making sure that the rounded side aligned with the pipe.
- Add the washers and nuts to the u-bolt.
- Tighten the nuts evenly on both sides, ensuring the clamp is securely attached to the pipe. The clamp should be firmly in place without any movement. Do not overtighten—excessive force may deform or crush the pipe, compromising the installation.
- Verify that the clamp is secure but not causing damage to the pipe by visually inspecting and applying light manual force.
- Loosen the cable holder bolts from the casting
- Place the cable under the cap so that the cable rests in the groove of the cap and of the casting.
- Tighten the bolts to 125-inch pounds.
Related Products
Our Partner:
visit www.sls-us.com to learn about their suite of lightning solutions for special applications