BB10B, Standing Seam Bolt Base
UL Listed
A cast bronze base with 2-way bolt pressure cable connector. 1-way bolt pressure clamp on backside joins the unit to a standing seam without penetration. Creates a strong and rigid base for parallel runs of cable. Stainless steel bolt, nut and washer. 2-13/16 x 2-15/16 in. (71.44 x 76.61 mm); approximately 9.3 oz. (263 g). Use suffix 3/8, 1/2 or 5/8 inch to denote air terminal thread size.| Specifications | |
| material | Bronze |
| available thread size | 3/8, 1/2 or 5/8 in. |
| weight | 9.3 oz. (263 g) |
| dimensions | 2-13/16 x 2-15/16 in. (7.14 x 7.46 cm) |
Manufacturer Installation Recommendations
- Loosen the nut from the backside of the base.
- Remove the nut, washer and 1 way cap.
- Loosen the bolt from the base to raise the cable holder cap.
- Locate the cable(s) underneath the cap so that the cable rests in the groove of the cap.
- Tighten the bolt to 100 inch pounds.
- Secure the base to the side of the standing seam by placing the 1 way cap back on the bolt, add the washer and tighten the nut until base is securely attached to the seam.
Related Products
Our Partner:
visit www.sls-us.com to learn about their suite of lightning solutions for special applications